I got one of those RGB LED matrix things for my birthday and wasn’t sure what to do with it. Then I found this awesome library which has Python bindings and can control it nicely even from a Raspberry Pi. Conveniently I had a spare Raspberry Pi 1 B+ sitting around so I hooked it up. After playing around for a while, I got the demos working.
Get data directly from a MQTT broker for getting live data (e.g. travel times in traffic, weather conditions) and for command and control. This allows me to connect the screen to my home-assistant home automation system.
Assemble various built-in elements like giraffes, animated text, rainbow text, pictures, animated gifs into various scenes that rotate through on the screen to display the information in various fun and/or useful ways.
There are Temperature and Duration sprites that you can define high and low values of so they’re red when they’re bad and green when they’re good, and anywhere in between.
You can set the scenes to be just random or you can control them through MQTT.
It’s intended to be very configurable but since it’s brand new some extra development is needed to make everything perfect. Send in your ideas and requests and code changes!
A relatively complete example configuration file is in the repo. That demonstrates using MQTT, connecting MQTT topics to various sprites, building your own frames of animation by hand, and adding in gifs and images from file paths. Note that you have to set an environmental variable or two to get the fonts right and whatnot.
I have a website or two and sometime wish I could get notifications whenever someone visited them, just for fun. Well I did it, and now I can get beeps in my home whenever anyone visits. It’s kind of cool to hear it go off, though normally it will be annoying, so we need a switch for it.
My mom has one of those on/off furnaces (EDIT: actually it’s a boiler) that heats up water and circulates it through pipes around the house that have little radiator fins. She wants it to turn on before she wakes up so it’s not so cold in the morning. In this post, I explain how to turn a normal furnace into a smart furnace for only a few bucks.
Oh this is exciting! I’ve been trying to figure out how to get motion events from my IP camera into my home-assistant instance running on my Raspberry Pi, and I just did a successful test! It works! Hooray. Briefly, I set up an email server on the Pi, have the camera email the Pi, have the email server trigger a script which parses the email for key words and sends MQTT signals as appropriate, at which point the home-assistant MQTT client sees them and triggers automations (like blinking a light to scare people off). Here’s how I did it.
I just configured a pretty slick burglar alarm with the open-source Home-Assistant platform running on my Raspberry Pi. It can be armed to trigger when a door is opened and/or when a motion sensor goes off.
Then, a sequence of events happens:
An IR LED turns on my stereo
A sound file I cobbled together starts playing. It starts with a computerized voice saying that yourentry been detected and recorded, then it beeps for a while (giving you time to disarm), and then it goes into a blaring siren noise. Quite the escalation!
A light blinks on and off a few times
A camera takes a series of snapshots of the area
An email is sent to my phone with the snapshots, showing me what’s going on
You may have seen my earlier post about my new home automation setup. Well I just upgraded it! I just finished testing out a new infrared remote control send and receive capability and it is pure awesome. Here’s what I can do now from within home-assistant:
Turn on and off my new DeLonghi portable air conditioner from Costco, and set the temperature to whatever
Turn on and off the TV and press any buttons from its remote control
Turn on and off the stereo and virtually press any buttons from its remote control (which I never even had!)
Use an old random blueray remote control to set scenes, turn lights on and off, etc. (basically do anything under home-assistant’s control)
This post is about how I did it on my Raspberry Pi.
I’ve always dreamed of having a “smart-home.” There’s just something cool about being able to flip switches and read sensors and have a program turn a light on when you open the door, but only if it’s dark. This post is about home automation.